Helix Firmware Update Failed. Please Try Again.

You are using an out of date browser. It may not brandish this or other websites correctly.
You should upgrade or use an culling browser.

• #i

HI,
i have Amilogic M805, Wifi is AP6212
on the board is: Netxeon MK808Q_V10-20140822
On the cover is MINI Tv class android Quad - Core MK808B Plus

If i tried USB_Burning_Tool
I have mistake [0x10105002]Romcode/Initialize DDR/Read initialize condition/USB Control setup fault
Why ?

• #2

HI,
i take Amilogic M805, Wifi is AP6212
on the lath is: Netxeon MK808Q_V10-20140822
On the cover is MINI Television course android Quad - Core MK808B Plus

If i tried USB_Burning_Tool
I have error [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
Why ?

I had the same trouble with S905 when use lacking usb flashing cable. and effort redownload firmware

• #iii

I had the same problem with S905 when employ lacking usb flashing cable. and try redownload firmware

i endeavour 2 cables and ii computers
windows 10 64bit
a windows xp 32bit

same error.

• #4

I had same problem with M8S android box, through trial and mistake and an hr of pulling my hair out, I tried this, Amlogic burning tool, Toothpick method and male to male person usb cable. (Leave toothpick in AV hole )After releasing the toothpick and pressing first the error comes up afterward 2% I quickly pressed the toothpick in once more to see what would happen and smash information technology started to burn the firmware on, maybe luck i dont know but box back up running.. Promise information technology works for others..Des

• #v

how you lot fix that error? Romcode/Initialize DDR/Read initialize condition/USB Command Setup Error

• #6

Same problem with MXIII 4k =(

• #7

Had the same problem, shortened the USB cable (that i made myself) to 15Cm, then it worked, signal integrity ?

• #8

first put the rom you volition use, then press showtime, simply then plug the device into the USB port. Worked with me having the same problems.

• #9

work for me... redownload firmware

• #x

Code4power, a link delight for download the img

• #11

Had same result with MXS Plus unit.... Tried a different USB-USB cablevision and now upward and running. MANY Thanks TO ALL ON HERE

• #12

uncheck erase flash and bootloader in amlogic tool and that should fix your trouble

• #13

uncheck erase wink and bootloader in amlogic tool and that should ready your problem

Worked similar a charm. Thanks

• #15

I cannot get by that fault. I have tried 3 unlike computers and various different versions of the burning tool also as unchecking the boxes suggested above. Then frustrating.

• #16

x96pro +

I cannot get past that fault. I have tried 3 different computers and diverse different versions of the burning tool equally well as unchecking the boxes suggested above. So frustrating.

I had the same issues as described higher up, and I simly but changed the cablevision lenght from one.5m to 30cm and the box started flashing itself from the burning tool!

• #17

I got a shorter cablevision but it still does it for me

• #xviii

And then guys subsequently going crazy did this - Tried the Nand Method on a95x. Sequence - Upload your prototype to USB called-for tool (don't hit starting time) - connect USB A to A cable (didn't connect) - Flash Pins five-six or 6-seven - Now USB tools see'south the box merely don't hitting start yet - because usb power is not enough to burn it - Now insert the toothpic to striking the reset push button - Now connect ability while toothpic is inserted - Viola - the box starts burning - This is a sure to piece of work method - everytime.

• #19

So guys after going crazy did this - Tried the Nand Method on a95x. Sequence - Upload your prototype to USB burning tool (don't hitting outset) - connect USB A to A cablevision (didn't connect) - Flash Pins five-half-dozen or 6-vii - At present USB tools encounter's the box just don't hit beginning however - because usb ability is not enough to burn it - Now insert the toothpic to hitting the reset button - Now connect power while toothpic is inserted - Viola - the box starts burning - This is a certain to work method - everytime.

Beloved, i tried this method also...but no luck. please advice..., if possible please share the link for usb burning tool and the firmware for MXQ PRO+ model. Will try fresh. Would highly appreciate ur help...

• #20

Had the same problem with mecool km9.
Tried all with no luck, so i tried to disconnect the box, shut and then restart usb burning tool, load the img file, unchecked erase flash and erase bootloader, hold the reset button with toothpic, then connect the box, hit refresh, and later on that, starting time the flashing process.
So, if you lot tried to uncheck erase... like i did, y'all should attempt to disconnect the box, as it doesn't seem to annals the unchecking without that.
:adept:

You can see how many failed i had before disconnecting/reconnecting the box !

Similar threads

griffinanyther.blogspot.com

Source: https://forum.xda-developers.com/t/usb_burning_tool-error.3321735/

Share this post